My wife and I were pulling out of the McDonald’s drive-thru line in Aiken, South Carolina and she said “Is that a Maverick?” (She’s a bit of a car nut herself.)
“It sure is!,” I said. “It’s a Maverick Grabber convertible.”
Wait! What?? A Maverick convertible?? Ford didn’t make Maverick convertibles!!!
A right turn out of McDonalds was immediately followed by a (possibly illegal) U-turn on Pine Log Road.
We pulled into the Advance Auto Parts store where we met Matt Comfort and his wife in their – yes – Maverick Grabber convertible.
“My dad Don bought the car back in 1988,” Matt told me. “He worked at a cabinet shop and his boss had it. His boss didn’t need it any more. My father showed interest in it because he loved it. He bought it for $50.”

“He already had a vision when he bought this,” Matt recalled, “because the same day he bought it, he cut the top off.”
Amazingly, that wasn’t the first time Don cut the roof off a car.
He also had a Fairlane, which was the first car he ever cut the top off of. But that modification didn’t work out too well.
“The Fairlane fell apart,” Matt said. “The door wouldn’t shut, it would fly open all the time.”
The Maverick conversion has obviously has worked out much better. But it took some time.
Mavericks were unibody cars. They had no chassis underneath. So when Don cut the roof off, it affected the car’s stiffness. And not in a good way.
“After cutting the roof off,” Matt said, “he was always afraid of the car’s stability. When you drove it the car kind of wiggled a little bit. You hit the brakes and you could feel the frame kind of twisting a little bit. Technically, from a liability standpoint, it’s actually a salvaged car.”

The Maverick, originally a 1974 model, had a small four cylinder engine. Due to the stability, or lack thereof, Don was in no rush to add more horsepower.
But then he installed the subframe connectors.
“He got a couple and put them on and they made a world of difference,” Matt explained. “No twist, no nothing anymore, and he felt comfortable putting in a 302.”
The 302 in Matt’s Maverick came from Spooky – a ‘72 Grabber that was a perennial star of the Maverick Comet Car Club International annual car show.
The 302 is basically stock except for the exhaust system. It’s got custom built manifolds feeding into dual exhaust pipes. Some engine upgrades are on Matt’s to-do list, and he thinks he’ll keep it true to a 1970s era car, carbureted and standard ignition, and not modernize it too much.

As Matt explained, “I’ve grown up with this for all my life and just from that experience, and being in the car culture for so long, I really like old cars. I like the way they sound, I like the way they feel.”
But he’s aware that keeping things original might get more difficult as parts become harder to find. He knows that first hand from his dad’s experience with the Maverick’s alternator.
“It is not the alternator that should be in this car,” Matt explained. “It’s supposed to be further into the motor, but the way the belts and the pulley system are, he had to extend it out. So he’s got this gigantic bushing. But he didn’t have a solid bushing for that. So he just put in a bunch of little ones. But it works.”
The V8 is hooked up to a stock C4 automatic transmission which Matt controls with a column shifter. The C4 spins the stock rear end although Don had to replace the center section a while back.
Currently the Maverick has the stock suspension components including power steering. Don has cut down the original springs, making the Maverick sit significantly lower than standard. The stock – although not all original – four wheel drum brakes are still working fine.
Some of the brake hardware is not original thanks to a huge pothole that Matt encountered while driving around Aiken.

“I hit a pothole,” Matt said. “It was bad. I was like, okay, the car’s not acting funny, it’s not wobbling or anything, so I didn’t bend a rim and no flat tire. And I thought let me just start slowing down. I hit the brakes. No brakes. All the way to the floor.”
Fortunately pushing the brake pedal to the max partially activated the rear brakes and Matt managed to get to a repair shop safely. The front drum brake hardware had shattered and had to be replaced.
Matt’s been looking into a front disc brake conversion and a change to a coil over suspension. He knows another Grabber owner who has changed to coil overs and is really happy with the results.
You may recall that 1974 Mavericks had the huge steel bumpers to comply with the 5 mph bumper laws. Don converted it to the 1972 style smaller bumper. Originally a mustard yellow, Don had the car painted Grabber blue. You can see the progression of the car in the photo below.

As you can imagine, a lot of work had to be done on the interior. Don installed custom panels on the doors and the dash, although the door panels have since been replaced. The dash panel itself is from a 1971 Maverick. The rear quarter panels have been painted. It’s got blue underglow lighting in the interior.
A good stereo was important because both Don and Matt love music. Don built the speaker panels above the windshield from a set originally made for Volkswagen Beetles.
The Maverick even has custom Maverick lights that shine down on the pavement when you open the doors. So cool.



Matt told me Don made two roofs for the Maverick.
“It’s got a drivable roof, and it’s got a sitting roof that covers the interior. It just snaps on so you can’t drive with that one, and I have a nice custom car cover for it.”
Over the years the sitting roof shrank, so making a replacement is on Matt’s to-do list.
The roofs make driving in cold weather a little chilly, and of course Matt doesn’t take it out in the rain.
Except that one time.
“I took my girlfriend to the prom,” Matt recalled. “It rained.”
Despite getting her prom hairdo rained on, Matt obviously made a good impression on that girlfriend because she is now his wife.
Matt has a ton of respect for the work Don has done on the Maverick. The car is a clear demonstration of Don’s talents and hard work.

“I asked my grandmother about what he was like when he was young,” Matt told me. “She said ‘That boy would piss me off so bad! I’d buy him stuff for Christmas and he would break it apart because he would want to know how it worked.’
“He was a perfectionist,” Matt said, “and his work obviously shows that. But that’s how he was. If he had a vision or an idea he’d make it happen.”
Matt told me that his Dad worked for Lowe’s as a subcontractor for years, and he was a top Installer every year.
A few years back Don hurt his shoulder from a fall at a site he was working on. That injury led to some complications that made working on the Maverick more difficult. So Don wanted Matt to have the Maverick.
“In April last year I saw a text from my father. He said ‘I’m thinking about giving you the Maverick.’ He wanted me to inherit it because he wanted me to enjoy it while he was still alive.”

That convertible Maverick is a huge part of Matt and Don’s life together. Like the time Matt dropped the Maverick’s trunk key through a rust hole in the floor while he and Don were driving. (Matt’s still not sure exactly how Don resolved that problem.) Like the multiple car shows they attended. Thousands of miles driving and many hours spent working on the car together.
Matt appreciates all those memories and he’s proud to be adding to them still today.
Photos courtesy of Matt Comfort
Click here to see more photos of Matt’s Maverick


Glenn, interesting article. Amazing you knew they didn’t make that model in a convertible. From the pictures I like the look a LOT more with the top down than up.